OEM Factory for Oil Resistant Rubber Hose - Rubber Lined Steel Pipes – Arex
OEM Factory for Oil Resistant Rubber Hose - Rubber Lined Steel Pipes – Arex Detail:
The rubber lined steel pipes are designed to be used in various abrasive pumping applications. Applications such as mill discharge, high pressure pumps, long tailings lines, demanding slurry pump applications and gravity pipes. Each end with vulcanized rubber seal fixed flange.
Wear-resistant and corrosion-resistant rubber lined steel pipe is made of common steel pipe as framework material and using with excellent properties of wear-resistant, corrosion-resistant and heat-resistant rubber as lining layer. It is compounded by special technology with high-performance adhesive. Mainly used in metallurgy, electric power, chemical industry, petroleum, coal, cement and other industries area. In the mining work, it is widely used in the mine tailings conveying system, coal mine backfilling and related pipe system fields. In particular, the pipeline is very suitable for conveying the temperature between -50°C to +150°C medium, which is easy to wear and corrosion. We can increase the wall thickness at the pipe corner according to the customer’s demand, thus extending the service life. Meanwhile, the service life of the rubber-lined steel pipe can reach 15-40 years in general. The pipe can be rotated nearly 90 degrees after 6-8 years of service. Each time of rotation can extend the serving life, Steel pipe can be repeatedly lined with rubber for three to four times, thus it reducing the use of costs in further.
Parts of specification for rubber-lined pipe
OD/mm |
Pipe wall thickness/mm |
Working pressure/MPa |
450 |
10~50 |
0~25.0 |
480 |
10~70 |
0~32.0 |
510 |
10~45 |
0~20.0 |
530 |
10~50 |
0~22.0 |
550 |
10~50 |
0~20.0 |
560 |
10~50 |
0~21.0 |
610 |
10~55 |
0~20.0 |
630 |
10~50 |
0~18.0 |
720 |
10~60 |
0~19.0 |
Physical Properties of rubber-lined pipe
Item | Standard |
Thickness of lining (MPa)≥ |
16.5 |
The lining and the skeleton 180°peel strength (KN/m) ≥ |
8 |
Elongation at the lining (%) ≥ |
550 |
The lining of the lining is stretched (300%, MPa) ≥ |
4 |
The lining layer atonal abrasion loss(cm³/1.61km) ≤ |
0.1 |
Lining hardness (Sauer type A) |
60±5 |
The rate of change of the intensity of the thermal ageing of the lining (70℃ x 72 h, %) ≤ |
10 |
Features
1. Excellent Construction
2. Good wear resistance and long service life
3. High strength and high impact resistance
4. Good corrosion resistance
5. Wide temperature range
6. Quick connection and easy installation
Product detail pictures:









Related Product Guide:
It can be our accountability to satisfy your preferences and competently provide you. Your satisfaction is our greatest reward. We are searching ahead towards your visit for joint growth for OEM Factory for Oil Resistant Rubber Hose - Rubber Lined Steel Pipes – Arex , The product will supply to all over the world, such as: Sevilla, Greece, Russia, We have more than 200 staff including experienced managers, creative designers, sophisticated engineers and skilled workers. Through hard work of all employees for the past 20 years own company grew stronger and stronger. We always apply the "client first" principle. We also always fulfill all contracts to the point and therefore enjoy excellent reputation and trust among our customers. You are very welcome to personally visit our company.We hope to start a business partnership on the basis of mutual benefit and successful development . For more information please do no hesitate to contact us..

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
